HP Fast Track - Applying HP FlexNetwork Fundamentals Sample Questions:

1. What is the console port designation for an HP Comware switch?

A) console
B) aux 0
C) con 0
D) interface console

2. A customer must connect networks in two buildings. The buildings are 15 meters apart. The customer does not want the additional cost of installing fiber between the two buildings and thus is exploring wireless options.
If the customer selects an 802.11n wireless solution, which wireless mode should they use?

A) inline
B) in-cell relay
C) infrastructure
D) multipoint

3. A network administrator is using Intelligent Management Center (IMC). Which protocol must the networkadministrator configure to correctly identify HP devices when performing auto discovery?

A) SNMP
B) SSH
C) LLDP
D) telnet

4. Which task should a network administrator include in the creation of an upgrade policy?

A) Read the release notes of the original operating system.
B) Make a copy of the original operating system.
C) Test the upgrade on a core switch.
D) Update network management software before deploying upgrades to network switches.

5. A network administrator receives a new HP Provision switch and notices that the software version running on the switch is older than what is currently used in the network. The network administrator copies an updated version of the operating system from the new switch's USB port to the secondary flash location. The network administrator then executes the following command:
Provision# boot system flash secondary:
The switch reboots using the new operating system. However, when the network administrator turns off the switch and turns it back on, the switch boots from the old operating system.
Which solution should the network administrator use to fix the problem?

A) Boot into the switch's Monitor ROM Console and perform the upgrade a second time.
B) Execute the boot-loader file command.
C) Execute the boot set-default flash secondary command.
D) Execute the startup-default secondary command.
E) Execute the startup-boot secondary command.

Solutions: